HAI Part Number: 38A00-1
Case of 12: 38A00-1CS

Requirements:

• Requires a neutral (white) connection wire.
  
  
• If you are using an HAI home control system with your switch you must install a UPB™ PIM & cable (HAI Part Number
  36A00-1).
  
  
• If you are using the HAI Upstart Configuration software you must install an UPB™ PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2).
  
  

Recommendation:

HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler (HAI Part Number 39A00-1).

Usage

A Scene Switch (also known as a Room Controller) allows you to control all lights in a room or area. Lights may be turned on, off, dimmed, brightened, and set to four different scenes to provide limitless options for both security and aesthetic lighting in your home.

---

A SCENE SWITCH IS
A POWERFUL TOOL FOR CREATING
SOPHISTICATED LIGHTING CONTROL

---

A Scene Switch is an optional device in an HLC installation. It is capable of controlling up to 7 UPB™ switches. Scene Switches may act as stand-alone devices to create simple lighting control for homeowners who do not desire a home control system.

HLC Products work as stand-alone or with a Home Control System.

An HAI home control system has the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, Touchscreen, Smartphone, or by a computer connected to the Internet.

About HLC

All HLC products are UL Listed and use Generation II Universal Powerline Bus (UPB™) – a digital communications standard for lighting and home control that ensures superior reliability. UPB™ has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB™ works over existing wires in a home and does not require new wiring.

Easy to Set Scenes

No home control system or software is required for you to change lighting scenes on a Scene Switch. The 4 scenes on a Scene Switch are easily set by first pressing the Scene Switch button that is to remember the scene, then setting the lights it controls to the desired levels, and then quickly pressing the same Scene Switch button 5 times in a row.

Remote Control

Scene Switches have an integrated infrared sensor and its buttons may be activated by a remote control (HAI Part Number 38A14-1). This remote control allows the homeowner to activate any button on the room's scene switch or any button on up to three other scene switches in the house.

Custom Engraving

A Scene Switch may have its buttons custom engraved to "name" the scene for each button using HAI Part Number 38A06-2.

Scene Switch Operation

Event What Happens Single-Tap On Brightens the lights towards fully on Double-Tap On Snaps the lights to fully on Hold Down On Lights will slowly brighten until On button is released Tap A Changes light levels to what is configured for the scene associated with this button Tap B Changes light levels to what is configured for the scene associated with this button Tap C Changes light levels to what is configured for the scene associated with this button Tap D Changes light levels to what is configured for the scene associated with this button Single-Tap Off Starts dimming the light towards fully off Double-Tap Off Snaps the lights to fully off Hold Down Off Lights will slowly dim until Off button is released

Examples

Switch LED

The buttons glow dimly to act as a night light. The last activated button glows brightly using a blue color.

You may change to change the intensity, but not the color, of the LED on a Scene Switch, by using the HAI UPB™ UPStart configuration software (see below).

Colors

The default color for a Scene Switch is White. Scene Switch Color Change Kits (HAI Part Number 38A04-color codeCS) are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.

Wallplate

No Wallplate is included when you purchase this switch. With the exception of the 1500W and 2400W models, HLC switches accommodate standard Decora-style wallplates. Mix and match to easily add a personalized touch to any room.

Configuration Software

When used with an HAI Home Control System HLC products automatically configure themselves, and outside software is not required. HAI offers HAI UPB™ UPStart Configuration software for professionals who desire to make advanced changes to our default setup.

HAI UPB™ UPStart configuration software will allow you to change the intensity, but not the color, of the LED on a Scene Switch.